this machine make from scrap copper to 8-17mm coper
The line is specially used to produce high conductivity oxygen free copper rod. When the mould clamping wheel is changed, it can also produce other specifications of copper rod, copper tube and other cross-section products. The casting specification is copper rod Φ8-20mm, and the daily production capacity is about 6t. The melting furnace adopts one set 300KG / 80kW electric furnace, and the holding furnace adopts one set 80kW electric furnace. The annual output of two connected updraft continuous casting unit is 2000 tons / year. The unit is driven by imported servo motor and loaded with advanced pitch control system in China. Users can directly input pitch length to meet the special requirements of casting process.
Main technical parameters:
Two connected furnace
Rated total power of melting furnace 80KW
Rated power of holding furnace 80KW
Number of continuous casting heads 4
Copper rod doameter: Ф8-20mm
Maximum continuous casting capacity 2000T/Y
Upper leading speed 560-2400mm/min
Working hours per year 7200h
Level tracking accuracy ±2mm
Winding specificati φ700mm×φ1600mm×800mm
Power consumption rate of molten copper ＜345kwh/ton
Power factor 0.95-1
Cooling water pressure 0.25-0.3mpa
Take up form: frequency conversion synchronous take up (8-12mm with automatic cable arrangement function)
Take up drive mode: reducer motor drive
Up lead drive mode: AC servo motor drive, the transmission chain adopts the synchronous toothed belt drive without clearance
Operation interface: data display and servo motor are controlled by touch screen display
Product Tags:
|
|
Copper Oven Copper Up casting Machine To Make Scrap Copper To 8mm Copper Images
|
